The CAT6 can know at any one time, up to 8 touch-keys.

The action of 'teaching' a new touch-key to the CAT6 will result in the wiping of it's memory

(ie, the CAT6 will 'forget' every touch-key it knows)

so you will have to re-teach all the touch-keys you want it to know.

1. Disarm the CAT6 by placing a known touch-key on the system touch-pad (if the LED on the touch-pad does not work, the system may be in sleep mode. CLICK HERE if you do not know how to remove the CAT6 from sleep mode)

 

2. Start the motorcycle and let the engine idle - so the CAT6 touch pad LED is constant Green

3. Touch AND hold the same touch-key (the one you dis-armed the system with in '1' above) onto the touch pad - the touch-pad LED will show a constant Green for approximately 10 seconds and then flash the touch-pad LED slowly (1 flash per second) Red-Green-Red-Green for 10 seconds and will then flash the touch-pad LED very quickly Red-Green-Red-Green. When this happens, remove the touch key and then replace the SAME touch key onto the touch-pad until the SLOW LED flash returns.

4. Remove the touch-key (this action has wiped all touch-keys from the CAT6 memory except this one)

 

5. The touch-pad LED will now flash quickly - hold on a new touch-key until the LED flashes slowly

6. Repeat number 5 for as many touch-keys as you wish to teach to the CAT6 up to a maximum of 8