|
|
|
There are points to remember when programming the DG8: 1. Acumen would expect the DG8 to learn your motorcycle within 60 seconds 2. First start the engine, then enter Learn Mode with the engine of the motorcycle idling. 3. You must have a neutral signal. If the DG8 does not show n, N or 0 when the motorcycle is in neutral 4. You must pause in neutral (so the DG8 shows an n, N or 0) between first and second gears when programming. 5. Do not switch the motorcycle ignition off during programming, if you do, you will have to start the complete programming sequence again. 6. Some motorcycles need a power stabilisation kit, available from Acumen FOC - request part number C-12-0001 CLICK HERE to contact Acumen |