cat 1-4-1-2

This is its default setting.

To change the default setting i.e. To get the system to arm everything.

Manually arm using the 'Key' button on the transmitter, or

Permanently ground the Yellow wire from the alarm; by connecting it to the mating 'spade'terminal on a black wire. These two connections are under the pillion seat area..

This is its default setting. To change the default setting i.e. To get the system to arm everything. Manually arm using the 'Key' button on the transmitter, or Permanently ground the Yellow wire from the alarm; by connecting it to the mating 'spade'terminal on a black wire. These two connections are under the pillion seat area..