If you can disarm the alarm - by transmitter or PIN

1. Disarm the alarm by transmitter or PIN

2. Remove the system fuse - you will hear 1 beep

3. Switch the ignition on - you will hear 1 beep

4. Change state of anti-tamper switch - you will hear 1 beep

5. Replace the system fuse - you will hear 2 beeps as confirmation you are in programming mode

6. Press transmitter 'key' button once - you will hear 1 beep

7. Press transmitter 'key' button again - you will hear 3 beeps

THE SYSTEM HAS NOW LEARNED THIS NEW TRANSMITTER