If you don't have a key fob and you don't know the PIN

1. Trigger the alarm by switching on the ignition and leaving it on

NOTE! If the siren does not sound (i.e. - it has already triggered 10 times for an 'ignition on' reason) then click HERE

2. While the alarm is sounding, remove the system fuse and connect both anti-tamper switch wires
to the bike battery positive terminal

3. Wait until the siren stops sounding

4. In the quiet period, before the alarm sounds again (10 seconds) replace the system fuse

5. The alarm will give 1 beep and the indicators will flash once

6. Press transmitter 'key' button once - you will hear 1 beep

7. Press transmitter 'key' button again - you will hear 3 beeps
(You may not hear these because the alarm may be sounding again by this time)

THE SYSTEM HAS NOW LEARNED THIS NEW TRANSMITTER

 

Would you now like to 'teach' another transmitter to the alarm?