6 Rapid beeps everytime the transmitter is used - regardless of which button - This means the transmitter batteries are becoming discharged - replace them as soon as possible

1 long beep on disarming - the alarm has reacted during your absence and run it's full course of 30 seconds. Enter Service/Diagnostics mode to find out why the alarm had reacted.

3 beeps every time you switch off the motorcycle ignition - The CAT1 is detecting an ignition 'on' voltage in excess of 15V - have the rectifier/regulator checked as soon as possible

1 very quiet beep every 2 minutes - The CAT1 is in Service mode and is reminding you the motorcycle is totally unprotected. The beep will stop after 24 hours, in Service mode, though the LED will remain constantly illuminated while the system is in Service mode.

Several beeps at regular 15 second intervals - The CAT1 is in Service/Diagnostic mode and has a recorded cause of the last alarm reaction. This will automatically 'drop out' after 2 minutes. The number of beeps will tell you why the alarm has reacted. For more information about diagnostics CLICK HERE